ماژول ترموستات دیجیتال XH-W1219 دارای نمایشگر و کلیدهای کنترلی

210,000 تومان

موجود نیست

با استفاده از این ماژول ، می توانید یک دماسنج مجهز به رله قطع و وصل خروجی داشته باشید.

بطور کلی ترموستات برای تنظیم درجه حرارت مایعات، گازها و جامدات در دستگاههای گرم یا سردساز در بخشهای مختلف زیر مورد استفاده قرار می گیرد.:

  • ساختمان : در بخش تاسیسات اعم از شوفا‍‍‍ژ خانه های مرکزی و کنترل دما در سیستم های هواساز، چیلر و فن کوئل و…
  •  صنعتی : اعم از گلخانه ها،گرم خانه،دستگاه جوجه کشی، کوره،دیگ های بخار و اتوکلاوها و …
  •  لوازم خانگی : در لباسشویی، ظرفشویی، سرخ کننده ها، سماور برقی، فرهای برقی، آبگرمکن برقی و گازی

مشخصات

  • دارای سنسور بیرونی ضدآب
  • رنج دمایی : 50- الی 110 درجه سانتی گراد
  • دقت: ± 0.1 درجه سانتی گراد
  • دارای یک رله خروجی
  • ولتاژ کاری : DC12V
  • ابعاد:60x43x16mm
  • طول سیم : 50 سانتی متر
  • دارای دفترچه راهنما

Product Introduction:
1.Model:XH-W1219
2.Control Range:-50~110 celsius
3.Control Precision:0.1 celsius
4.Measuring Input:NTC10K waterproof sensor L=0.5m
5.High Temperature Alarm:-49~110 celsius
6.Input Voltage:DC 12V
7.Output Type:relay output 10A (max)
8.Return Difference Setting:0.1~30 celsius
9.Delay Starting:0-10min
10.Temperature Calibration:-10~10 celsius
11.Size:60*43*16mm

Function Introduction:
P0.Temperature Control Mode:when first use this product;if it is used to heating,please set H,if used to cooling,please set C
P1.Return Difference Setting:long press SET key entering into internal setting,choose P1 seting;then press SET key to achieve return difference value setting
P2:Temperature Calibration:this function is for temperature calibration.If detection temperature and actual temperature is different,then usrs can apply this function to calibrate
P3:Delay Start:this function is for compressor cooling
P4:Set High Temperature Alarm Value:when actual temperature is higher than this value,screen will flash and sound an alarm

در انبار موجود نمی باشد